Super-Resolution Processing of Synchrotron CT Images for Automated Fibre Break Analysis of Unidirectional Composites.

Researchers

Journal

Modalities

Models

Abstract

Fibre breaks govern the strength of unidirectional composite materials under tension. The progressive development of fibre breaks is studied using in situ X-ray computed tomography, especially with synchrotron radiation. However, even with synchrotron radiation, the resolution of the time-resolved in situ images is not sufficient for a fully automated analysis of continuous mechanical deformations. We therefore investigate the possibility of increasing the quality of low-resolution in situ scans by means of super-resolution (SR) using 3D deep learning techniques, thus facilitating the subsequent fibre break identification. We trained generative neural networks (GAN) on datasets of high-(0.3 μm) and low-resolution (1.6 μm) statically acquired images. These networks were then applied to a low-resolution (1.1 μm) noisy image of a continuously loaded specimen. The statistical parameters of the fibre breaks used for the comparison are the number of individual breaks and the number of 2-plets and 3-plets per specimen volume. The fully automated process achieves an average accuracy of 82% of manually identified fibre breaks, while the semi-automated one reaches 92%. The developed approach allows the use of faster, low-resolution in situ tomography without losing the quality of the identified physical parameters.